Single Sided Thermal Break Tape (1/4″ and 1/8″ thick)

FO-V2344 and FO-V2348 are single-sided thermal break tapes, designed to reduce thermal bridging on outer and inner framing in metal buildings. Available in 1/4 inch and 1/8 inch thicknesses, the tape has excellent holding power and high-load capability.

APPLICATIONS FOR THE TAPE

The most common applications for the single-sided thermal break tape include:

  • create a vapor seal where large gaps occur
  • create a lap joint seal on corrugated metal building panels or prefabricated wall panels
  • create a flash break on building purlins and girt flanges
  • maintain a seal in high movement joints
FEATURES OF THE TAPE

Features of the single-sided thermal break tape include:

  • adheres strongly to smooth and rough surfaces (including corrugated metal)
  • easy to apply
  • sticks quickly (which speeds up application)
  • conforms well to irregular surfaces
  • easy to die-cut for custom sizing
  • the paper release liner protects the adhesive from contaminants when cutting the tape to specific lengths
TAPE ADHESIVE

The tape has an acrylic adhesive.

TAPE SIZES

The single-sided thermal break tape is available in the following sizes:

  • 2 inches by 50 feet (1/4 inch thick)
  • 3 inches by 50 feet (1/4 inch thick)
  • 2 inches by 75 feet (1/8 inch thick)
  • 3 inches by 75 feet (1/8 inch thick)
TAPE COLORS

The single-sided thermal break tape is available in gray.

WHO USES THE TAPE

The tape is most commonly used by:

  • construction professionals
  • building contractors
  • insulation contractors
  • metal building specialists
ECHOtape PART NUMBER

The part numbers for this tape are FO-V2344 (1/4 inch thickness) and FO-V2348 (1/8 inch thickness).